Competitor Search
click here to chat with us

DC Motor Controls

American Control Electronics carries a wide selection of DC motor controls that exceed industry standards. A DC motor controller manipulates the position, speed, or torque of a DC-powered motor and easily reverses, so the DC motor drive current runs in the opposite direction. Enjoy higher starting torque, quick starting and stopping, reversing, variable speeds with voltage input and more. Select technology type, input voltage, output voltage, continuous current, enclosure, braking type, reversing type, and isolation. 

The DC motor speed controller function is perhaps the most common manipulation used in DC controllers. This speed can be controlled in four different ways: flux variation, armature voltage variation, a change in the supply voltage, and pulse width modulation (PWM). PWM is the technique commonly used for achieving speed control in a DC motor. It delivers energy through a series of pulses rather than a continuous signal. By altering the pulse width, the DC motor controller is able to regulate the energy flow to keep it consistent. 

While less popular, DC motor torque control is achieved by a DC motor drive regulating the armature current. Since the armature current isn’t regulated, the motor can operate at whatever speed necessary to achieve the desired torque level. The torque level can remain constant achieving a “taper tension effect” for a fixed input reference and torque mode center winders. However, the machine operator can in some circumstances increase the torque set-point as diameter increases. 

American Control Electronics offers a variety of DC motor controllers that include various operation modes both separately and together. It simply depends on the application and needs of your motor control systems. However, due to such diversity, it can be difficult to find the DC motor controller that fits your mold. Be sure to understand the voltage ranges and types of control needed to properly operate your control system.

 


View our DC Motor Controllers selection below.

Narrow Your Search

Technology

Isolation

Communication

# of Axis

HTL1.5-D-4Q Low Voltage Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 3 Amps @ 12 VDC, 1.5 Amps @ 24 VDC
Peak Current: 4 Amps @ 12 VDC, 2 Amps @ 24 VDC for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: Yes
Remote Signal: 0-5 VDC, 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

C1XP01-115AC-A DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-130 VDC
Field Voltage: N/A
Continuous Current: 1 Amp
Enclosure: NEMA 1
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

C1XP03-115AC-A DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-130 VDC
Field Voltage: N/A
Continuous Current: 3 Amps
Enclosure: NEMA 1
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

C4XL3025 DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 3 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: 0-2.5 VDC @ 115 VAC, 0-5 VDC @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, CSA
Please login to view pricing.

C4XL3200A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 10 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: 0-2.5 VDC @ 115 VAC, 0-5 VDC @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

DC1.5-12 Low Voltage Motor Control

Input Voltage: 12 VDC
Output Voltage: 0-12 VDC
Field Voltage: N/A
Continuous Current: 1 Amp
Peak Current: 1.5 Amps for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No Preference
Reversing: No
Technology: PWM
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

DC1.5-12-0964 Low Voltage Motor Control

Input Voltage: 12 VDC
Output Voltage: 0-12 VDC
Field Voltage: N/A
Continuous Current: 1 Amp
Peak Current: 1.5 Amps for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: PWM
Isolation: No
Remote Signal: 0-3.3 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

DC2.0-12 Low Voltage Motor Control

Input Voltage: 12 VDC
Output Voltage: 0-12 VDC
Field Voltage: N/A
Continuous Current: 1 Amp
Peak Current: 2 Amps for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: PWM
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

DC60-12/24-4Q Low Voltage Motor Control

Input Voltage: 12 / 24 VDC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 30 Amps
Peak Current: 60 Amps for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control, Torque Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: No
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 61800-5-1 (US&C)
Please login to view pricing.

DC60-36/48-4Q Low Voltage Motor Control

Input Voltage: 36 / 48 VDC
Output Voltage: 0-36 / 0-48 VDC
Field Voltage: N/A
Continuous Current: 30 Amps
Peak Current: 60 Amps for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control, Torque Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: No
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 61800-5-1 (US&C)
Please login to view pricing.

EC2 DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: N/A
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-6 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

HTL05-D-4Q Low Voltage Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 5 Amps
Peak Current: 7.5 Amps for 10 seconds
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: Yes
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

HTL05-D-4Q-T Low Voltage Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 5 Amps
Peak Current: 7.5 Amps for 10 seconds
Enclosure: Chassis
Operation Mode: Torque Control
Braking: Regenerative
Reversing: No Preference
Technology: PWM
Isolation: Yes
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

LV02-24AC Low Voltage Motor Control

Please login to view pricing.

M1 DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: N/A
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: 0-4.5 VDC
Feedback: None
Communication: None
# of Axis: 2
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

M2 DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: N/A
Continuous Current: 5 Amps per axis, 6.5 Amps total / 10 Amps per axis, 11.5 Amps total with heat sink
Enclosure: Chassis
Operation Mode: Speed Control, Torque Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: 0-4.6 VDC
Feedback: None
Communication: None
# of Axis: 2
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

M2-D DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 5 Amps per axis, 6.5 Amps total / 10 Amps per axis, 11.5 Amps total with heat sink
Enclosure: Chassis
Operation Mode: Speed Control, Torque Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: 0-4.6 VDC
Feedback: None
Communication: None
# of Axis: 2
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

MC10 DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 10 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: 0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

MC10-PCM DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 10 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC, 4-20 mA
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

MC10-R DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Enclosure: NEMA 4X
Operation Mode: Speed Control
Braking: No Braking
Reversing: Armature Switching
Technology: SCR
Isolation: No
Remote Signal: 0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

MDPM03-D230-4Q-PCM DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 3 Amps
Enclosure: Chassis
Operation Mode: Speed Control, Torque Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Feedback: None
Isolation: Yes
Remote Signal: 0 to ±5 VDC, 0 to ±10 VDC, 4-20 mA
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 61800-5-1
Please login to view pricing.

MDPM07-D230-4Q-PCM DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 7 Amps
Enclosure: Chassis
Operation Mode: Speed Control, Torque Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: Yes
Remote Signal: 0 to ±5 VDC, 0 to ±10 VDC, 4-20 mA
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 61800-5-1
Please login to view pricing.

MM03-115AC-PCM DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: 50, 100 VDC
Continuous Current: 3 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC, 4-20 mA
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

MM03-230AC-PCM DC Motor Control

Input Voltage: 230 VAC
Output Voltage: 0-180 VDC
Field Voltage: 100, 200 VDC
Continuous Current: 3 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC, 4-20 mA
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

MM10-115AC-PCM DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: 50, 100 VDC
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC, 4-20 mA
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

MM10-230AC-PCM DC Motor Control

Input Voltage: 230 VAC
Output Voltage: 0-180 VDC
Field Voltage: 100, 200 VDC
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC, 4-20 mA
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

MM23001C DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM23001C-Q DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM23002D DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control, Torque Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-2.5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA, CE
Please login to view pricing.

MM23011C DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 1.5 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM23011C-Q DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 1.5 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM23012D DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 1.5 Amps
Enclosure: Chassis
Operation Mode: Speed Control, Torque Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-2.5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA, CE
Please login to view pricing.

MM23101C DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: NEMA 1
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM23102D DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: NEMA 1
Operation Mode: Speed Control, Torque Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-2.5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA, CE
Please login to view pricing.

MM23111C DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 1.5 Amps
Enclosure: NEMA 1
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM23112D DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 1.5 Amps
Enclosure: NEMA 1
Operation Mode: Speed Control, Torque Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-2.5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA, CE
Please login to view pricing.

MM23201C DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: NEMA 1
Operation Mode: Speed Control
Braking: Dynamic Braking
Reversing: Armature Switching
Technology: SCR
Isolation: No
Remote Signal: 0-2.5 VDC
Remote Signal: 0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM23202D DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: NEMA 1
Operation Mode: Speed Control, Torque Control
Braking: Dynamic Braking
Reversing: Armature Switching
Technology: SCR
Isolation: No
Remote Signal: 0-2.5 VDC
Feedback: None
Communication: None
# of Axis: 1
Please login to view pricing.

MM23211C DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 1.5 Amps
Enclosure: NEMA 1
Operation Mode: Speed Control
Braking: Dynamic Braking
Reversing: Armature Switching
Technology: SCR
Isolation: No
Remote Signal: 0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM23212D DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 1.5 Amps
Enclosure: NEMA 1
Operation Mode: Speed Control, Torque Control
Braking: Dynamic Braking
Reversing: Armature Switching
Technology: SCR
Isolation: No
Remote Signal: 0-2.5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA, CE
Please login to view pricing.

MM23401C DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 10 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM23402D DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 10 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control, Torque Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: 0-2.5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA, CE
Please login to view pricing.

MM23411C DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 1.5 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM23412D DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 1.5 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control, Torque Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-2.5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA, CE
Please login to view pricing.

MM301A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 10 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC, 4-20 mA
Feedback: Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

MM301U DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 10 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC, 4-20 mA
Feedback: Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM311U DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 1.5 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC, 4-20 mA
Feedback: Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM31700B DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: N/A
Continuous Current: 3 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

MM31701B DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: N/A
Continuous Current: 2 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

MM31750B DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: N/A
Continuous Current: 3 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

MM31751B DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: N/A
Continuous Current: 2 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

MM501U DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 25 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC, 4-20 mA
Feedback: Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

MMXL02-D240AC DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 2 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

MMXL02-D240AC-PCM DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 2 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: Yes
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

MMXL05-D240AC DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 5 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

MMXL05-D240AC-PCM DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 5 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

MMXL10-D240AC DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA, CE
Please login to view pricing.

MMXL10-D240AC-PCM DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA, CE
Please login to view pricing.

PCM21000A DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: N/A
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

PCM21010A DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: N/A
Continuous Current: 2 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C)
Please login to view pricing.

PCM22000A DC Motor Control

Input Voltage: 230 VAC
Output Voltage: 0-180 VDC
Field Voltage: N/A
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

PCM23001A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 10 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC, 4-20 mA
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 61800-5-1 (US&C)
Please login to view pricing.

PCM23401A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 10 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC, 4-20 mA
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

PCM23411A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 3 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: Yes
Remote Signal: 0-10 VDC, 4-20 mA
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C)
Please login to view pricing.

PCMXP02-115AC DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-130 VDC
Field Voltage: N/A
Continuous Current: 2 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: Yes
Remote Signal: 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

PCMXP05-115AC DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-130 VDC
Field Voltage: N/A
Continuous Current: 5 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: Yes
Remote Signal: 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

PCMXP10-115AC DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-130 VDC
Field Voltage: N/A
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: Yes
Remote Signal: 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

RD16U DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: N/A
Continuous Current: 3 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

RG500A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 10 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: SCR
Isolation: No
Remote Signal: 0 to ±10 VDC
Feedback: Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

RG500UA DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 7 Amps / 10 Amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: SCR
Isolation: No
Remote Signal: 0 to ±10 VDC
Feedback: Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

RG500UA-PCM DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 7 Amps / 10 Amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: SCR
Isolation: Yes
Remote Signal: 0 to ±250 VDC, 1-5 mA, 4-20 mA, 10-50 mA
Feedback: Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

RG501A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 10 Amps
Enclosure: NEMA 4X
Operation Mode: Cycling Control
Braking: Regenerative
Reversing: Regenerative
Technology: SCR
Isolation: No
Remote Signal: N/A
Feedback: Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

RG510A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 3 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: SCR
Isolation: No
Remote Signal: 0 to ±10 VDC
Feedback: Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

RG510UA DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 3 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: SCR
Isolation: No
Remote Signal: 0 to ±10 VDC
Feedback: Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

RG510UA-PCM DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 3 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: SCR
Isolation: Yes
Remote Signal: 0 to ±250 VDC, 1-5 mA, 4-20 mA, 10-50 mA
Feedback: Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

RG511A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 3 Amps
Enclosure: NEMA 4X
Operation Mode: Cycling Control
Braking: Regenerative
Reversing: Regenerative
Technology: SCR
Isolation: No
Remote Signal: N/A
Feedback: Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

RG5500U DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 25 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: SCR
Isolation: Yes
Remote Signal: 0 to ±250 VDC, 1-5 mA, 4-20 mA, 10-50 mA
Feedback: Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

SQ16U DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: 100 VDC
Continuous Current: 3 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

SQ216U DC Motor Control

Input Voltage: 230 VAC
Output Voltage: 0-90 VDC
Field Voltage: 100 VDC
Continuous Current: 3 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

XL3025A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 3 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: 0-2.5 VDC @ 115 VAC, 0-5 VDC @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

XL3050A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 5 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: 0-2.5 VDC @ 115 VAC, 0-5 VDC @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

XL3200A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 5 Amps / 10 amps with heat sink
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: 0-2.5 VDC
Remote Signal: 0-2.5 VDC @ 115 VAC, 0-5 VDC @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

XL3300A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 15 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: 0-2.5 VDC @ 115 VAC, 0-5 VDC @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C)
Please login to view pricing.

XP01-115AC-SL DC Motor Control

Please login to view pricing.

XP02-115AC DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-130 VDC
Field Voltage: N/A
Continuous Current: 2 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

XP02-115AC-Q DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-130 VDC
Field Voltage: N/A
Continuous Current: 2 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

XP03-115AC-SL DC Motor Control

Please login to view pricing.

XP05-115AC DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-130 VDC
Field Voltage: N/A
Continuous Current: 5 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

XP10-115AC DC Motor Control

Input Voltage: 115 VAC
Output Voltage: 0-130 VDC
Field Voltage: N/A
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 508C (US&C), CSA
Please login to view pricing.

C1EC2 DC Motor Control

Motor & Power Voltages: 90 VDC motor with 115 VAC source
Input Voltage: 115 VAC
Output Voltage: 0-90 VDC
Field Voltage: N/A
Continuous Current: 5 Amps
Enclosure: NEMA 1
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

DC1.5-24 Low Voltage Motor Control

Input Voltage: 24 VDC
Output Voltage: 0-24 VDC
Field Voltage: N/A
Continuous Current: 1 Amp
Peak Current: 1.5 Amps for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: PWM
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

HTL10-D-4Q Low Voltage Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0-12 / 0-24 / 0-36 / 0-48 VDC
Field Voltage: N/A
Continuous Current: 20 Amps @12 VDC, 10 Amps @ 24 VDC, 6.7 Amps @ 36 VDC, 5 Amps @ 48 VDC
Peak Current: 30 Amps @ 12 VDC, 15 Amps @ 24 VDC, 10 Amps @ 36 VDC, 7.5 Amps @ 48 VDC for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control, Torque Control, Cycling Control, Positioning Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: Yes
Remote Signal: 0 to ±5 VDC, 0 to ±10 VDC, 4-20 mA
Feedback: Resistive
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

LV01-24AC-E10U Low Voltage Motor Control

Input Voltage: 12 / 24 VAC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 1 Amp
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: PWM
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

MGB400-11-00MD DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 8 Amps / 11 Amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Operation Mode: Speed Control, Torque Control
Braking: Regenerative
Reversing: Regenerative
Technology: SCR
Isolation: No
Remote Signal: 0 to ±10 VDC
Feedback: None
Communication: None
Please login to view pricing.

MGC403-11-00MD DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 8 Amps / 11 Amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control, Torque Control, Cycling Control, Positioning Control
Braking: Regenerative
Reversing: Regenerative
Technology: SCR
Isolation: Yes
Remote Signal: 0 to ±10 VDC, 4-20 mA
Feedback: Resistive, Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM23071A DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 5 Amps / 10 amps with heat sink
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: SCR
Isolation: No
Remote Signal: 0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C, CSA
Please login to view pricing.

MM32750B DC Motor Control

Input Voltage: 230 VAC
Output Voltage: 0-90 VDC
Field Voltage: 100 VDC
Continuous Current: 3 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No Braking
Reversing: No Reversing
Technology: SCR
Isolation: No
Remote Signal: N/A
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

P4XMDPM05-D230-4Q-PCM DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 5 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control, Torque Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Remote Signal: 0 to ±5 VDC, 0 to ±10 VDC, 4-20 mA
Isolation: Yes
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 61800-5-1
Please login to view pricing.

C4MDPM5.5-D230-4Q-PCM DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 130 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 5.5 Amps
Enclosure: NEMA 4X
Operation Mode: Speed Control, Torque Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: Yes
Remote Signal: 0 to ±5 VDC, 0 to ±10 VDC, 4-20 mA
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 61800-5-1
Please login to view pricing.

MGB400-1.5-00MD DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: N/A
Continuous Current: 1.5 Amps
Enclosure: Chassis
Operation Mode: Speed Control, Torque Control
Braking: Regenerative
Reversing: Regenerative
Technology: SCR
Isolation: No
Remote Signal: 0 to ±10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Recognized 61800-5-1 (US&C)
Please login to view pricing.

MGC403-1.5-00MD DC Motor Control

Input Voltage: 115 / 230 VAC
Output Voltage: 0 - 90 / 0 - 180 VDC
Field Voltage: 50, 100 / 100, 200 VDC
Continuous Current: 1.5 Amps
Enclosure: Chassis
Operation Mode: Speed Control, Torque Control, Cycling Control, Positioning Control
Braking: Regenerative
Reversing: Regenerative
Technology: SCR
Isolation: Yes
Remote Signal: 0 to ±10 VDC, 4-20 mA
Feedback: Resistive, Tachogenerator
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 61800-5-1
Please login to view pricing.

DC6-12/24 Low Voltage Motor Control

Input Voltage: 12 / 24 VDC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 3 Amps
Peak Current: 6 Amps for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: PWM
Isolation: No
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

DC6-12/24-4Q Low Voltage Motor Control

Input Voltage: 12 / 24 VDC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 3 Amps
Peak Current: 6 Amps for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: No
Remote Signal: 0-5 VDC, 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

DC6-36/48-4Q Low Voltage Motor Control

Input Voltage: 36 / 48 VDC
Output Voltage: 0-36 / 0-48 VDC
Field Voltage: N/A
Continuous Current: 3 Amps
Peak Current: 6 Amps for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: No
Remote Signal: 0-5 VDC, 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

DC16-12/24 Low Voltage Motor Control

Input Voltage: 12 / 24 VDC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 16 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: PWM
Isolation: No
Remote Signal: 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

DC20-12/24-4Q Low Voltage Motor Control

Input Voltage: 12 / 24 VDC
Output Voltage: 0-36 / 0-48 VDC
Field Voltage: N/A
Continuous Current: 10 Amps
Peak Current: 20 Amps for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: No
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

DC30-12/24-4Q Low Voltage Motor Control

Input Voltage: 12 / 24 VDC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 15 Amps
Peak Current: 30 Amps for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: No
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

DC30-12/24-4Q-W Low Voltage Motor Control

Input Voltage: 12 / 24 VDC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 15 Amps
Peak Current: 30 Amps for 1 minute
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: No
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS
Please login to view pricing.

DC60-12/24 Low Voltage Motor Control

Input Voltage: 12 / 24 VDC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 60 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: PWM
Isolation: No
Remote Signal: 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

DC60-36/48 Low Voltage Motor Control

Input Voltage: 12 / 24 VDC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 60 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: No
Reversing: No
Technology: PWM
Isolation: No
Remote Signal: 0-10 VDC
Feedback: None
Communication: None
# of Axis: 1
Certifications: RoHS, UL Listed 508C
Please login to view pricing.

DC120-12/24-4Q Low Voltage Motor Control

Input Voltage: 12 / 24 VDC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 60 Amps
Peak Current: 120 Amps for 1minute
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: No
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
Certifications: RoHS
Please login to view pricing.

DC250-12/24-4Q Low Voltage Motor Control

Input Voltage: 12 / 24 VDC
Output Voltage: 0-12 / 0-24 VDC
Field Voltage: N/A
Continuous Current: 120 Amps
Continuous Current: 250 Amps
Enclosure: Chassis
Operation Mode: Speed Control
Braking: Regenerative
Reversing: Regenerative
Technology: PWM
Isolation: No
Remote Signal: 0-5 VDC
Feedback: None
Communication: None
Certifications: RoHS
Please login to view pricing.

DC240-36/48-4Q Low Voltage Motor Control

Please login to view pricing.