MM23071A DC Motor Control

MM23000C Series

Trim pots are lifted 90 degrees off the board to allow for easier calibration in specific mounting orientations.

The MM23071A drive is a reliable and cost-effective solution for controlling your permanent magnet or shunt-wound DC motors in variable-speed applications. It uses SCR's to provide full-wave rectification of the AC line input. This dual voltage drive operates using 115 VAC or 230 VAC, 50/60 Hz, to operate 90 or 180 VDC SCR brush-type motors from 1/8 to 2 HP. Packaged in a compact footprint, this user-friendly drive possesses diagnostics and options to accommodate user needs.

Potentiometer Kit 202-0031 is included with a purchase of the MM23071A

$321.73

Qty:

Contact the factory for volume pricing

Model Number	Enclosure	Maximum Current (ADC)	Input Voltage (VAC)	Output Voltage (VDC)	Power Range		Field / Shunt Supply	Braking	Reversing	Isolation
					HP	kW
MM23071A	Chassis	10*	115	0 - 90	1/8 - 1	.09 - .75	50 / 100	No	No	No
			230	0 - 90	1/8 - 1	.09 - .75	100 / 200
				0 - 180	1/4 - 2	.19 - 1.5

* Heat sink kit 223-0159 must be used when the continuous output current is above 5 amps.

Features

MM Footprint: Traditional MM mounting pattern and footprint
Field Supply: Voltage output to energize the field winding of a shunt-wound motor
Stopping Modes: Inhibit (N.O.) for coasting to a stop. Can be used for frequent starting and stopping
Diagnostic LEDs: Current Limit, Power
Vertical Trim Pots: Trim pots lifted 90 degrees off the board to provide easier access for calibration
in specific mounting orientations

Technical Data

1.37 Form Factor
1% Base Speed Regulation
60:1 Speed Range

Trim Pots

Maximum Speed
Minimum Speed
Acceleration
Deceleration
Current Limit
IR Compensation

User's Manual

2D .DXF File

3D .IGS & STEP Files