MM23411C DC Motor Control

MM23000C Series

Minarik Drives' MM23411C drive is housed in a Nema 4X enclosure, guaranteeing protection from washdown applications, corrosive material, wind-blown dust, incidental contact with enclosed equipment or unwanted external solid objects. The MM23411C provides sound performance for DC brush-type motors from 1/20 to 1/4 HP. This stand-alone cased drive contains a neon power light, pre-mounted heat sink, power switch, and speed adjustment knob accessible from the front of the enclosure.

Using full-wave rectification of the AC line input, this SCR drive provides a 60:1 speed range. Users make all wire terminations at the screw terminal block inside the enclosure. The dual voltage capability allows these drives to operate from 115 or 230 VAC, 50/60 Hz, to run 90 or 180 VDC motors.

$567.13

Qty:

Contact the factory for volume pricing

Model Number	Enclosure	Maximum Current (ADC)	Input Voltage (VAC)	Output Voltage (VDC)	Power Range		Field / Shunt Supply	Braking	Reversing	Isolation
					HP	kW
MM23411C	NEMA 4X	1.5	115	0 - 90	1/20 - 1/8	.04 - .09	50 / 100	No	No	No
			230	0 - 90	1/20 - 1/8	.04 - .09	100 / 200
				0 - 180	1/10 - 1/4	.07 - .19

Features

NEMA 4X Enclosure: Water resistant and dust proof enclosure
Field Supply: Voltage output to energize the field winding of a shunt-wound motor
Stopping Modes: Inhibit (N.O.) for coasting to a stop. Can be used for frequent starting and stopping
Diagnostic LEDs: Current Limit
Case LEDs: Power
Pre-Wired Switches: ON/OFF

Technical Data

1.37 Form Factor
1% Base Speed Regulation
60:1 Speed Range

Trim Pots

Maximum Speed
Minimum Speed
Acceleration
Deceleration
Current Limit
IR Compensation