DC16-12/24 Low Voltage Motor Control

DC-1Q Series

The DC16-12/24 PWM drive was designed for applications running from a DC power supply or DC battery power. This drive provides continuous current ratings and higher bus capacitance (to better handle ripple currents) than competitive units.

The DC16-12/24 is ideal for many types of portable equipment, especially battery-powered equipment due to its ability to maintain variable speed control as the battery discharges. This results in an overall increase in running time of the equipment.

With a 150% overload capacity, an inhibit function for remote starting and stopping, a power LED and non-interactive trimmer pots, the DC16-12/24 stands out among the many DC input drive options.

Potentiometer Kit 202-0031 is included with a purchase of the DC16-12/24

$414.44

Qty:

Contact the factory for volume pricing

Enclosure	Maximum Current (ADC)	Peak Current (ADC)*	Input Voltage (VAC)	Output Voltage (VDC)	Power Range		Reversing	Isolation
Enclosure	Maximum Current (ADC)	Peak Current (ADC)*	Input Voltage (VAC)	Output Voltage (VDC)	HP	kW	Reversing	Isolation
Chassis	16	-	12	0 - 12	1/20 - 1/5	.04 - .16	No	No
			24	0 - 12	1/20 - 1/5	.04 - .16
			24	0 - 24	1/10 - 2/5	.02 - .32

Low voltage motor operation: Designed for 12, 24, 36 and 48VDC motors.
Speed range and regulation: 1% regulation over 80:1 speed range.
User adjustable calibration pots: IR compensation, max speed, min speed, acceleration and current limit.
Diagnostic LEDs: Power.Stopping modes: The user can coast the motor to a stop (N.O.).
Spade terminals and screw terminal block: Quick and easy connections.
DC input voltage: Accepts DC input and outputs DC voltage up to 95% of the input with near perfect form factor.
One drive for two motor voltages: On board jumper to select 12 or 24VDC motor (36 or 48VDC on some models).
Additional features: Inhibit terminals (P/N 201-0024 for plug assembly), extruded chassis and non-interactive trimmer pots.

User's Manual

Catalog Page