C4XL3025 DC Motor Control

XL Series

Minarik Drives' C4XL3025 filtered pulse-width-modulated (PWM) variable speed DC drive provides exceptional performance. It is housed within a NEMA 4X enclosure, guaranteeing protection from washdown, corrosive material, windblrown dust, incidental contact with enclosed equipment or unwanted external solid ojects. It outputs nearly pure DC power to brush-type motors ranging from 1/20 to 1/2 HP. The C4XL3025 accepts 115 or 230AC input to output 0-130 or 240VDC, respectively; resulting in higher speeds from standard 90 or 180VDC SCR duty motors. This innovative technology lets users operate many low voltage motors with only minor calibration adjustments.

MOSFET power devices switch at 22kHz, which is above the audible range, to provide fast circuit response and a constant 1.05 form factor over the entire 100:1 speed range. The highly efficient C4XL3025 drives provide cool, quiet motor operation with extended brush life and low maintenance. In addition, it can operate smaller size, lower voltage motors to provide both cost and space savings.

$774.35

Qty:

Contact the factory for volume pricing

Enclosure	Maximum Current (ADC)	Input Voltage (VAC)	Output Voltage (VDC)	Power Range		Field / Shunt Supply	Reversing	Isolation
Enclosure	Maximum Current (ADC)	Input Voltage (VAC)	Output Voltage (VDC)	HP	kW	Field / Shunt Supply	Reversing	Isolation
NEMA 4X	3	115	0 - 130	1/20 - 1/4	.04 - .20	50 / 100	No	No
		230	0 - 130	1/20 - 1/4	.04 - .20	100 / 200
		230	0 - 240	1/10 - 1/2	.08 - .40	100 / 200

Nema 4X enclosrue: Protects against external corrosive material and incidental contact.
Speed range and regulation: 1% regulation over 100:1 speed range.
User adjustable calibration pots: IR compensation, min speed, max speed, current limit, acceleration and deceleration.
Diagnostic LEDs: LEDs for Power On light on front of enclosure. Current limit LED on pc board.
Stopping modes: Coast to a stop with Power On/Off switch or via inhibit terminals (N.O.).
Cage clamp terminal block: Quick and easy wire terminations reduce installation time!
22kHz switching frequency: A high switching frequency means a quiet motor!
AC input/DC output switches: Allows the selection of the lower voltage (0-130VDC) DC output for either the 115 or 230VAC input selection.
Additional features: Dual voltage AC input, DC field supply and on-board line fuse.