UL 61800-5-1 Listed: Tested to the latest UL standard
NEMA 4X Enclosure: Plastic corrosion resistant weatherproof enclosure that protects against dirt and splashing
Microprocessor Based: Allows custom programming for OEMs
Variety of Motors: Permanent Split Capacitor (PSC), Shaded Pole, Synchronous, and 3Ø Induction
Doubler Mode: Will run 230 VAC motors with a 115 VAC line
Torque Foldback: Allows up to 200% torque for short periods to overcome intermittent peak loads, then reduces the torque to a (preset) safe level
Isolated Logic: Accepts floating or grounded 0±5 VDC, 0±10 VDC, or 4-20 mA signals
Adjustable Base Frequency: Can be set for 50 or 60 Hz at rated output voltage, regardless of input frequency
Selectable Switching Frequency: 16kHz for audibly quieter motor operation, 1.6kHz for less electrical noise and may prevent GFI tripping.
DC Injection Braking: Can be used for quicker braking
Dump Circuitry: Internal circuitry for the hookup of an external dump resistor
Quadrature Encoder Option: For OEM applications, the drive can be programmed to follow quadrature encoder feedback without any circuitry changes
Thermally Protects: Drive recognizes when overheated as a result from overload. After flashing a warning code, it will trip if condition persists
Diagnostic LEDs: Power, Status (Torque Limit, Undervoltage, Overvoltage, Short Circuit, Overtemperature Warning, Overtemperature Trip)
User Adjustable Calibration Trim Pots: Minimum Speed, Maximum Speed, Torque Limit, Slip Compensation, Boost, Acceleration, Deceleration, Brake Voltage, Brake Time-out