Model
Number |
Enclosure |
Maximum
Current
(ADC) |
Input
Voltage
(VAC) |
Input
Frequency
(Hz) |
Output
Voltage
(VAC) |
Output
Frequency
(Hz) |
Power Range |
Braking |
Reversing |
Isolation |
| HP |
kW |
| MDVF03-D230-PCM |
Chassis |
3* |
115 / 230 |
50 or 60 Hz |
0 - 115 |
50 or 60 Hz |
1/16 - 3/8 |
.05 - .28 |
Yes
(DC Injection) |
Yes |
0 ± 5 VDC
0 ± 10 VDC
4-20 mA |
| 0 - 230 |
50 or 60 Hz |
1/8 - 3/4 |
.09 - .56 |
* When mounted to allow upwards airflow across the plate. De-rate to 2.5 amps when mounted in any other configuration.
Features
- UL 61800-5-1 Listed: Tested to the new UL standard to be implemented in 2020.
- Microprocessor based: Allows custom programming for OEM’s.
- Control a variety of motors: 3-phase induction motors, single-phase permanent split capacitor (PSC), shaded pole, and synchronous motors.
- Doubler mode: Can double a 115 VAC line to run a 230 VAC motor.
- Isolated inputs: Accepts floating or grounded signals 0 ± 5 VDC, 0 ± 10 VDC or 4-20 mA.
- Diagnostic LED: LEDs for power and status (undervoltage, overvoltage, short circuit/current trip, overheating warning/trip).
- Thermally protects: Drive recognizes when overheated as a result of overload. It first flashes a warning code on the status LED and will eventually trip if the condition persists.
- Stopping modes: User can use DC Injection braking, decelerate, or coast the motor to a stop.
- Dump circuitry: Internal circuitry for the hookup of an external dump resistor.
- Quadrature encoder option: For OEM applications, the drive can be programmed to follow quadrature encoder feedback without any circuitry changes.
|
Trim Pots
- Minimum Speed
- Maximum Speed
- Acceleration
- Deceleration
- Torque
- Voltage Boost
- Slip Compensation
- Brake Current
- Brake Time-Out
|
