Model Number |
Cover Type |
Input Voltage Volts AC (50/60 Hz, 1Ø) |
Maximum Continuous Motor Current (RMS Amps / Phase) 1 |
Maximum Power
|
Output Voltage Range Volts AC (50 or 60 Hz, 3Ø) |
Braking |
Reversing |
Isolation |
HP |
kW |
XAC640 |
Enclosure 2 |
115 |
4.8 |
1 |
0.75 |
0 - 230 |
Yes (DC Injection) |
No 3 |
No |
230 |
6.0 |
1 1/2 |
1.1 |
1 When mounted for upwards airflow through heat sink fins. De-rate by 10% if mounted in another orientation.
2 Designed for NEMA 4X weather-resistance applications.
3 Circuit board contains connections for reversing switch, but switch not included with model XAC640. Model XAC660 contains switch.
Features
Industry Standard Mounting Pattern: Designed to retrofit existing systems
Microprocessor Based: Allows custom programming for OEMs
Doubler Mode: Will run 230 VAC motors with a 115 VAC line
Overload Capability: Allows up to 200% torque for 1 miunute
Motor Overload Protection: Provides motor overload protection to prevent damage to the motor in an overload condition
Selectable Auto/Manual Restart: Use a jumper to select if the drive should automatically restart after a fault condition clears
Adjustable Base Frequency: Can be set for 50 or 60 Hz motors, regardless of input frequency
Selectable Switching Frequency: 12kHz for audibly quieter motor operation, 2kHz for less electrical noise and may prevent GFI tripping
DC Injection Braking: Can be used for quicker braking
Thermally Protects: Drive recognizes when overheated as a result from overload. After flashing a warning code, it will trip if condition persists
Diagnostic LEDs: Power, Status (Normal Operation, Motor Overload, I2T Timeout, Short Circuit, Undervoltage, Overvoltage, Stop, Phase Loss Detection, Communication Error)
User Adjustable Calibration Trim Pots: Minimum Speed, Maximum Speed, Acceleration, Deceleration/DC Injection Brake Time & Voltage, Torque Limit & Motor Overload Protection, Boost, Slip Compensation