Model
Number |
Enclosure |
Maximum
Current
(ADC) |
Input
Voltage
(VAC) |
Output
Voltage
(VDC) |
Power Range |
Field / Shunt
Supply |
Reversing |
Isolation |
| HP |
kW |
| RG60U-4S |
Chassis |
10* |
115 |
0 - 90 |
1/8 - 1 |
.10 - .75 |
No |
Yes |
No |
| 230 |
0 - 90 |
1/8 - 1 |
.10 - .75 |
| 0 - 180 |
1/4 - 2 |
.20 - 1.5
|
*Heat sink kit 223-0159 must be used when the continuous output current is above 5 amps.
- MM footprint: Extremely
compact size with an industry standard mounting footprint.
- 4Q reversing: Regenerative/4
quadrant drives have the ability to perform quick, contactorless, reversing
on-the-fly
- Speed range and regulation: 1%
regulation over 50:1 speed range. 0.1% over 60:1 speed range with the addition
of a tachometer for feedback.
- User adjustable calibration
pots: IR compensation, max speed, min speed, forward acceleration,
reverse acceleration, forward torque, reverse torque, tachometer and deadband.
- Diagnostic LEDs: Power,
forward current limit, reverse current limit
- Stopping modes: The
user can decelerate (N.O.), regeneratively brake (N.O.) or coast the motor to a
stop (N.O. and N.C.).
- Spade terminals and cage
clamp terminal block: Quick and easy wire connections
- Configurable enable and
inhibit: Can be configured to be either normally open or normally
closed
- Additional features: Tachometer
feedback, gold extruded chassis and plastic capped trimmer pots
- -PCM option: Add a –PCM to the end
of the part number to receive the drive with an isolation daughter card for
receiving non-isolated speed reference voltages between –10V and +10V
