RG510UA-PCM DC Motor Control

RG500 Series

Minarik Drives' RG510UA-PCM is a full-wave, four-quadrant regenerative SCR drive that provides smooth motoring and braking torque for brush-type DC motors ranging from 1/20 through 1/2 HP, for a single or bi-directional variable speed, without using mechanical contactors.

Slide switches allow the RG510UA drive to accept a 115 or 230VAC input to run 90 or 180VDC motors. The tach feedback mode virtually guarantees constant set speed under a varying load. Applications with overhauling loads, rapid deceleration, basic positioning and high duty cycle reversing and braking benefit from this versatile regenerative drive.

Potentiometer Kit 202-0003 is included with a purchase of the RG500UA-PCM

Let's Talk About Your Project

$813.88

Qty:

Contact the factory for volume pricing

Model Number	Enclosure	Maximum Current (ADC)	Input Voltage (VAC)	Output Voltage (VDC)	Power Range		Field / Shunt Supply	Reversing	Isolation
Model Number	Enclosure	Maximum Current (ADC)	Input Voltage (VAC)	Output Voltage (VDC)	HP	kW	Field / Shunt Supply	Reversing	Isolation
RG510UA-PCM	Chassis	3	115	0 - 90	1/20 - 1/4	.04 - .20	50 / 100	Yes	0 to ±10 VDC 4-20 mA
			230	0 - 90	1/20 - 1/4	.04 - .20	100 / 200
			230	0 - 180	1/10 - 1/2	.08 - .40	100 / 200

4Q Reversing: Regenerative/4 Quadrant drives have the ability to perform quick, contactorless reversing on-the-fly!
Speed range and regulation: 1% regulation over 50:1 speed range. 0.1% regulation over 60:1 speed range with the addition of a tachometer for feedback.
User adjustable calibration pots: IR compensation, forward torque, reverse torque, tachometer, min speed, max speed, forward acceleration, reverse acceleration and deadband.
Stopping Modes: User can decelerate (N.O.), regeneratively brake (N.O.) or coast to a stop (N.C.). User can also decelerate to min speed (N.O.)
Cage clamp terminal block: Quick and easy wire terminations.
On board fusing: No need to add external fusing for protection of your motor or drive.
Additional features: Dual voltage AC input, switch selectable armature or tachometer feedback mode and field supply for shunt wound motors.
Options and accessories: -201-0024 inhibit plug for regenerative brake option, 200-0386 limit switch logic board and DLC600 digital controller.