RoHS UL Listed CSA

Series: MM23000C Series

Part Number: MM23001C

The MM23001C drive is a reliable and cost-effective solution for controlling your permanent magnet or shunt-wound DC motors in variable-speed applications. It uses SCR's to provide full-wave rectification of the AC line input. This dual voltage drive operates using 115 VAC or 230 VAC, 50/60 Hz, to operate 90 or 180 VDC SCR brush-type motors from 1/8 to 2 HP.

Packaged in a compact footprint, this user-friendly drive possesses diagnostics and options to accommodate user needs.
Enclosure Maximum
Power Range Field / Shunt
Reversing Isolation
MM23001C Chassis 10* 115 0 - 90 1/8 - 1 .10 - .75 50 / 100 No No
230 0 - 90 1/8 - 1 .10 - .75 100 / 200
0 - 180 1/4 - 2 .20 - 1.5

*Heat sink kit 223-0159 must be used when the continuous output current is above 5 amps.

  • MM footprint: An extremely compact size in an industry standard mounting footprint.
  • Speed range and regulation: 1% regulation over 60:1 speed range.
  • User adjustable calibration pots: IR compensation, min speed, max speed, current limit, acceleration and deceleration.
  • Diagnostic LEDs: LEDs for current limit status.
  • Stopping modes: Coast to minimum speed with inhibit terminals (N.O.),decelerate to min speed through pot circuit (N.C). External dynamic braking can be added.
  • Spade terminals: Easy to use, lower cost and able to fit in a smaller package.
  • Additional features: Dual voltage AC input and field voltage for shunt wound motors.
  • Options and accessories: -Q option includes quick disconnect terminal and power LED. DLC600 digital controller. PCM4 isolator card. 201-0024 inhibit plug with 18 inch leads.
  • Conveyors
  • Pumps
  • Packaging Equipment
  • Printers
  • Industrial and Commercial Machinery
Introduction to the MM23000C Series
MM23000C Series Wiring
Reversing with the MM23000C Series
MM23000C Connections to PCM4
Trim Pot Calibration: Minimum Speed
Trim Pot Calibration: Maximum Speed
Trim Pot Calibration: Acceleration
Trim Pot Calibration: Deceleration
Trim Pot Calibration: Torque / Current Limit
Trim Pot Calibration: IR Compensation